||Abs Pvc Melamine Edge Banding Machine With Pre-Milling Function
The main function of the machine is introduced:
1. Pre-milling: Double milling cutters are used to re-modify the ripple marks, burrs or non-perpendicular phenomena caused by panel sawing and cutting machine processing to achieve better edge sealing effect. It makes the bonding between the edge band and the board more closely, and the integrity and aesthetics are better.
2. Gluing and sealing: Through the special structure, the edge-sealing plate and the edge-sealing material are glued evenly on both sides to ensure stronger adhesion.
3. End trimming: through precise linear guide motion, automatic mold tracking and high-frequency high-speed motor fast cutting structure are used to ensure that the cut surface is flat and smooth.
4. Coarse trimming/fine trimming: all adopt the automatic tracking of the mold and the high-frequency high-speed motor structure to ensure the smoothness of the upper and lower parts of the trimmed plate. It is used to repair the excess edge banding material above and below the edge banding strip of the processed sheet.
1) Rough trimming function: the rough trimming tool is a flat knife. In order to deal with the trimming of the excess part of the sealing veneer. Because when sealing the veneer, it is not possible to directly use the finishing knife R-shaped knife. The veneer is generally 0.4mm thick. If the finishing knife is used directly, it is easy to cause breakage. In addition, rough trimming can also be used for the first trimming process when sealing PVC and acrylic.
2) Refining function: The finishing knife is an R-shaped knife. Mainly used for PVC and acrylic edge strips of panel furniture, preferably edge strips with a thickness of more than 0.8mm.
5. Profile tracking: the upper and lower corner trimming device can make the end face of the plate more smooth and beautiful
6. Scraping: It is used to eliminate the ripple marks caused by the cutting process of non-linear motion of trimming, and make the upper and lower parts of the plate more smooth and tidy.
7. Polishing: Clean the processed plate with a cotton polishing wheel, and make the edge-sealing end surface smoother by polishing.
PLC intelligent control, independent liquid crystal display can see the running process of the machine more clearly and comprehensively, which is convenient, quick and easy to use, real-time monitoring, real-time adjustment, more accurate, high-efficiency production, and the edge sealing effect is not compromised.
Pre-milling, the first process when the sheet enters the conveyor belt, the diamond double milling cutter is used to trim the edge chipping, corrugation and burr phenomenon of the sheet cover again, so as to achieve better edge sealing effect.
The edge-sealing gluing device heats the sol through the gluing pot, and adopts the spiral structure to deliver the glue. The gluing speed is fast, uniform, and the adhesive force is firm.
The end trimming device, through the structure of automatic mold tracking and high-frequency high-speed motor, ensures that the cut surface is smooth and smooth, and has the protection function of flushing the plate to enhance the stability of the flush.
Rough trimming device, the cutter at the rough trimming part is a flat knife, which is used to trim the excess edge sealing material on the upper and lower parts of the edge banding of the processed sheet.
Finishing device, the finishing knife is R2 inclined knife, which can leave 5-6 wire allowance for the next scraping process. The automatic tracking of the mold and the high-frequency motor are used to achieve fast cutting, and the R2 inclined knife is used to repair the radian.
Scraping device, profile scraping, is used to eliminate the secondary wave marks caused by the cutting process of non-linear motion of trimming, so that the upper and lower parts of the plate are more smooth and tidy. better.
The polishing device cleans the processed plate with a cotton polishing wheel, removes excess glue stains, and makes the edge banding section smoother and tidy through polishing.